page_banner

Products

  • M2 Cabinet Door Mdf Pvc Vacuum Press Machine

    M2 Cabinet Door Mdf Pvc Vacuum Press Machine

    The appearance and specification may change with improvement, and we will not give extra notice about such changes.

  • TM2580C  Multi-function membrane press machine

    TM2580C Multi-function membrane press machine

    Function It is used to work on various high-profile PVC, hot transfer and single veneer. Features 1. 6 pcs of steel plates in 25mm machined down without deformation. And installed in power point. Provide strong structure. 2. working table running controlled by DELTA frequency transformer; starting in low speed, running fast and end in low, which 3.DELTA PLC controller used for operation system, and touch-screen automatically convenient to control. 4. Vacuum pump Made in China wit...
  • TM4600 Double Door Skin Vacuum Press Machine

    TM4600 Double Door Skin Vacuum Press Machine

    General Introduction This machine full automatic operation(heating, vacuum suction,working table start,one button start).Long working table can place 2 room door skins,the PVC film size same as door skin size, only wider 3cm than each side,maximumly save the PVC film. Features Technical Specifications
  • BF-45-L Multifunction Hotmelt Pur Profile Wrapping Machine

    BF-45-L Multifunction Hotmelt Pur Profile Wrapping Machine

    General Introduction This machine take PUR glue wrapping the real wood, PVC film and melamine paper. It can wrap various products, such as skirting boards, set lines of door and windows, and railings of stairs. Work fast and perfect adhesive for the material. Work Enviroment Requirement equips and parameters Equips description Assist devices Equipped device Warning system introduction of control panel introduction of control panel touch but...
  • BF-33-L Multifunction Hotmelt PUR Profile Wrapping Machine

    BF-33-L Multifunction Hotmelt PUR Profile Wrapping Machine

    General Introduction This machine take PUR glue wrapping the real wood, PVC film and melamine paper. It can wrap various products, such as skirting boards, set lines of door and windows, and railings of stairs. Work fast and perfect adhesive for the material. Work Enviroment Requirement equips and parameters Equips description Assist devices Equipped device Warning system
  • Wide panel PUR lamination machine

    Wide panel PUR lamination machine

    General Introduction This machine is for wrapping roll material on wide board,such as MDF, Particleboard, solid wood, PVC panel, aluminum board etc. Take special spraying slot nozzle coating adhesive on back surface of material,then press bonded on boards and profiles. parameters Included units PUR hotmelt machine AD-200 parameters main technical charters
  • FQ 1500B slitting and rewinding machine, equipped 15 round cutters.

    FQ 1500B slitting and rewinding machine, equipped 15 round cutters.

    Parameter Work width 1500mm (air roll 1500mm) Base profile PVC,veneer,paper,PET film speed  0-40M/min Unwinding roll max diameter  Φ400mm Rolling roll max diameter  Φ400mm Film thickness 0.1mm-0.5mm Min slitting width 25mm Rectify way  non Total power 1.5KW Unwinding inflation force 5KG magnetic powder brake with manual control Unwinding way air roll Rolling way air roll Rolling inflation force non structure horizontal type Slicing  round knife(15sets...